GEP210

  • product_banner_1
  • product_banner_2
  • product_banner_3
  • product_banner_4
  1. 1
  2. 2
  3. 3
  4. 4





PRO

STRONG

LIGHT

Cool

Products Features

  • 3K hardness of carbon plate
  • Motherboard for the 3K one plate, the thickness of 3MM, strong and durable
  • Includes a plate (BEC 5V and 12V out), a tail plate (combination taillights, a CCD aluminum plate) lens plate (strong)
  • Lens angle can be adjusted, the maximum angle of 45 degrees
  • The overall layout is reasonable, the installation is simple and convenient.
  • Overall low center of gravity, battery and motor in the same plane, the center of gravity balance, tumbling more smooth and smooth
  • Frame structure is strong, in addition to the 3MM board, the carbon fiber board is 1.5MM, high strength
  • Machine tail with two kinds of image transmission method, the installation of the antenna vertical installation and bending wire, you adjust
  • 10 special reinforced M3*15MM aluminum column, so that the frame structure is strong
  • Side plate and tail plate more concise
  • High precision and high durability screw

低重心设计

低重心设计,使飞机更加平稳,包括飞机转向或者翻滚。电子设备装在一体3MM碳板底下,将电子设备的重量都压在机身底下。电子就上在一体板上方,基本上是桨面平行,飞机整个重量在飞机的集中在中心线上,这样一大好处就是飞机更平稳。非常好。

可调角度的摄像头

不可否认,我们认为是非常好的设计。摄像头的角度可以调节,最大角度可调至45度。而且使用业界少用的铝片,一体成型,包围着CCD镜头,便镜头不容易受损。另外镜头往机身里缩,完全不用摄像CCD镜头会受损,非常好的设计。

尾灯板

是的,如你所料,我们都知道穿越过程中,飞机如果有灯光,会增加不少乐趣和方便性,我们考虑到了,灯板一共有6颗LED灯,飞机时非常亮。当然,你也可以选择没灯版本,这是由你决定的。

侧板

嗯,如你所料,整机都是用1.5mm碳板包裹住的,这样的好处很多,比如不容易进灰尘,减少电子设备出故障的概率。另外外观也更好看了,而且这样的结构会使飞机更加结实。但是,你可能会想到了,重量问题。没错,重量我们也有考虑,我们很好的控制了重量,空整机在100g以内,的确很让人兴奋。

 

电池卡板

低重心的设计,最容易忽略的就是电池被桨打到了,我们可不愿意看到这样。所以我们做出这样的设计,如图所示,电池卡板把电池左右都固定住了,使电池在飞行过程中不容易左右摆动,这样就能减少甚至不会出现打电池的情况。

飞机整体

这款飞机是210mm轴距,标准210机架。机身长度185mm。这样的一大好处是给电池上下的移动提供空间。由于飞机重心很重要,玩家可以根据移动调整整机的重心,使飞机更好飞。飞机最大桨距是5寸桨,当然也兼容4寸桨。我们当然推荐是使用5寸桨,这样才能体现这个机身的性能,你说呢?

GEP210 Professional crossing FPV aircraft release

GEP210

And beyond born professional racing across the machine GEP210, after months of struggle, finally, and we met. The aircraft has the following main characteristics:

  1. 3K hardness of carbon plate
  2. motherboard for the 3K one plate, the thickness of 3MM, strong and durable
  3. includes a plate (BEC 5V and 12V out), a tail plate (combination taillights, a CCD aluminum plate) lens plate (strong)
  4. lens angle can be adjusted, the maximum angle of 45 degrees
  5. the overall layout is reasonable, the installation is simple and convenient.
  6. overall low center of gravity, battery and motor in the same plane, the center of gravity balance, tumbling more smooth and smooth
  7. frame structure is strong, in addition to the 3MM board, the carbon fiber board is 1.5MM, high strength
  8. machine tail with two kinds of image transmission method, the installation of the antenna vertical installation and bending wire, you adjust
  9. 10 special reinforced M3*15MM aluminum column, so that the frame structure is strong
  10. side plate and tail plate more concise
  11. high precision and high durability screw

 

Technical parameters:

Diagonal – wheelbase 210MM

The basic body weight 98 grams

We recommend the use of motor 1806/2204/2206/2208

Support 4 inch /5 inch propeller

 

Recommended configuration:

Flight control: Naze32 or F3 flight control

Image transmission: 200mV 5.8G

Electric adjustment: 20A BL firmware

Motor: 2204 2300kv motor

Lens: Sony 700 line camera lens

产品页-GEP210-页头product_detail_3product_detail_7product_detail_4product_detail_3product_detail_2

5 thoughts on “GEP210 Professional crossing FPV aircraft release

  1. Boisselier says:

    hi,

    I have a gepr210 and my rgb led don’t works. Do you sell replacement parts ?

    best regards

    m.boisselier

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.