Cinebot25 V2

Frame manual

Cinebot25 V2 Frame Assembly Instruction

AIO manual

TAKER F722 35A 32Bit AIO Manual

Cinebot25 V2

Legal Notice

These design files (STL) are provided for non-commercial use only.
Any form of commercial exploitation without prior written permission is strictly forbidden.

Unauthorized use for commercial purposes will result in legal action being taken to protect our rights.

Suitability & Flight Experience

Q: Is this drone suitable for beginners?

A: Yes, absolutely. The Cinebot25 V2 is tuned to have excellent handling ("hand feel"), making it very forgiving. Even if your stick control isn't precise yet, the drone remains stable and easy to control.

Note for absolute beginners: While the drone is beginner-friendly, we highly recommend practicing on a simulator first to understand basic flight logic. For your first real flight, choose an open outdoor area and use Angle Mode (Self-Leveling).

Q: What is the hover throttle point for this drone?

A: The drone typically hovers at approximately 28% - 30% throttle.

Q: How is the video quality straight out of the camera?

A: The video quality is excellent. The drone uses a 6-point floating suspension system to minimize vibrations.

O4 Pro Users: If you use the internal "SuperSmooth" (or equivalent) stabilization, the footage is silky smooth.

Post-Processing: Even with internal stabilization turned off, the gyro data is clean, making it very friendly for third-party stabilization software like Gyroflow.

Q: I notice "prop wash" or shaking when doing loops or aggressive maneuvers. Is the drone defective?

A: No, this is normal behavior for CineWhoop-style drones, especially those with a lower thrust-to-weight ratio.

Tip: When exiting a loop or dive, do not drop the throttle completely to zero. Maintain a small amount of throttle input to keep the drone stable and minimize prop wash.

Hardware & Assembly

Q: Is the modular head (camera cage) easy to replace?

A: Yes. You only need to remove 4 specific screws to swap the head. Please refer to the included Quick Start Guide for a diagram showing exactly which screws to remove.

Q: Can I use camera heads from other drone brands?

A: No, the modular system is currently only compatible with GEPRC Cinebot25 heads. However, we will soon More models, and the heads will be interchangeable between these models.

Q: I bought the WTFPV PNP version. How do I install the O4 Air Unit?

A: Installation: The aluminum camera head comes pre-assembled. You simply need to remove the corresponding screws to install your unit.

Accessories: The kit includes an acrylic adapter plate. The antenna mount design is open-source.

Cooling: For the "Lite" or smaller O4 units, you may need a third-party cooling kit (most options on the market are compatible).

Tutorial: Stay tuned

Q: How do I install the O4 Pro unit?

A: Similar to the standard O4, the head is pre-assembled. We have prepared a specific video guide to help you with the installation process.

Tutorial: Stay tuned

Q: If my propellers break, can I use a different brand? Will it cause "Jello" in the video?

A: We recommend using the original specification propellers for the best tuning performance. Using different propellers may alter the PID requirements and could potentially introduce vibrations (Jello) or reduce flight time.

Electronics & Setup

Q: How do I bind the ELRS receiver?

A:

  1. Plug in the battery. A slow flashing blue light on the receiver (visible through the bottom print) indicates it is in normal mode.

  2. Disconnect and reconnect the battery three times.

  3. On the third connection, keep the battery plugged in. The blue light will start flashing quickly, indicating Binding Mode.

  4. Select "Bind" on your radio transmitter.

  5. The blue light will turn to a slow flash, and then eventually become solid. Your radio should announce "Telemetry Recovered." Binding is complete.

Q: Why does the LED strip light up when I plug in the battery, but then turn off?

A: This is intentional. The light flashes on boot to confirm the LEDs are functioning, but the default setting is "OFF" to save power/reduce distraction.

  • How to turn it on: Go to the Modes tab in Betaflight and assign a switch to "USER1".

Q: The drone has a GPS. Can I use "Return to Home" like a DJI drone?

A: FPV drones function differently from camera drones. This feature is called "GPS Rescue" and is intended for emergencies only, not for daily convenience.

  • Setup: Enable "GPS RESCUE" in the Betaflight Modes tab and assign it to a switch.

  • Procedure: Ensure you have a lock of 6-8 satellites before taking off. Hover or circle near the takeoff point for a moment to establish the home point.

  • Warning: Please use this feature with caution.

Q: What is the default firmware version?

A: The drone ships with Betaflight 4.5.2.

Q: My receiver takes a different amount of time to connect (bind) each time. Is this wrong?

A: It is normal for the connection to take about 5 seconds. If it consistently takes longer than 10 seconds to connect, even if it eventually works, there may be an issue. In that case, please contact support or send it in for inspection.