Features
- Use mainstream STM32F722 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight
- Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
- [email protected] + 5V@3A dual independent BEC
Specifications
GEPRC TAKER F722 BLS 80A V2 STACK
FC model: GEP-F722-HD V2 Flight Controller
- MCU: STM32F722
- IMU: ICM42688-P(SPI)
- Air Unit Connection: Direct plugging into DJI Air Unit
- Black Box: 16M onboard
- USB Interface: Type-C
- Barometer: support
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC: 5V@3A, [email protected] dual BEC
- Firmware Target: GEPRCF722
- Size: 36.85×36.85mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
- Input Voltage: 3-6S LiPo
- UART: 5
- Power Filter: Integrated LC filter
- Weight: 8.1g
ESC Model: TAKER H80_BLS 80A 4IN1 ESC
- Input Voltage: 3-6S Lipo
- Ammeter: Support
- Continue Current: 80A
- Burst Current: 85A (5 second)
- Support Protocol: Dshot 150/300/600
- Size: 56.3*61.1mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
- Weight: 28.1g
- Target: B_X_30
Includes
1 x GEP-F722-HD V2 Flight Controller
1 x TAKER H80_BLS 80A 4IN1 ESC
1 x Filter board(Dual 50V 2200uF)
1 x DJI connection cable(SH1.0 6pin 100mm)
1 x FC adapter cable(SH1.0 8pin 30mm)
1 x Receiver silicone cable(SH1.0 4pin 150mm)
1 x Camera connection cable(SH1.0-SH1.25 3pin 60mm)
1 x VTX connection cable(SH1.0 4pin-6pin 100mm)
1 x XT90 battery plug
1 x Red and black power cable(10AWG 240mm)
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts(M3)
12 x Silicone anti-shake pads(M3)















