GEPRC SPAN-F722-VTX Stack AIO

Introduction：

The SPAN-F722-VTX is F722 DUAL GYRO ICM20689 ALL IN ONE Stack, It’s Build-IN BlackBox 32Mb onboard Flash and 5.8G 600mW VTX build-in,This is very simple to building.

F722 and DUAL gyro have  amazing flight experience, It’s very smooth.

The GEP-F722-DUAL-BT supports a variety of receivers including Sbus, PPM, CRSF, DSMX, iBus protocols, which can be used with your remote control.

Main Feature:

• MCU: STM32F722RET6
• IMU: 2x ICM20689(SPI)
• BlackBox: 32Mb onboard Flash
• Build-in 5.8G 600mW VTX
• Integrated LC Filter
• Simple installation method, compact space
• Mounting Holes: 30.5*30.5mm/Φ3mm
• Support:Sbus,PPM,CRSF,DSMX,iBus

Specifications:

F722 DUAL ICM20689 Flight Controller:

• MCU: STM32F722RET6
• IMU: 2x ICM20689(SPI)
• BlackBox: 32Mb onboard Flash
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro：NO
• BEC Output: [email protected]
• Integrated LC Filter
• Firmware target: EXF722DUAL
• Size: 36x36mm board, φ4mm with Grommets φ3mm
• Power input: 3-6S LiPo

5.8G 600mW VTX:

• Channel: 48
• Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 600mW
• Connector type: MMCX Connector
• Traditional button
• IRC Tramp protocol

BL32 50A ESC 4IN1:

• MCU: STM32FO51K86(32bit 48mHz)
• Continuous Current: 50A
• Peak Current: 55A (5S)
• Current sensor: YES
• Telemetry：Supported
• Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
• Firmware Version:GEPRC-BL32-4IN1
• Input Voltage: 3-6S Lipo

BLHeliSuite download:

http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

Manual download PDF

Package Included:

• 1x FC & VTX board
• 1x 50A ESC board
• 1x MMCX Antenna Extension Cord Wire
• 1x 5.8G Antenna
• 1x 8pin cable
• 4 x 4pins JST-SH sockets
• 1x 35v 220uf Capacitor
• 1x XT60 Power cable
• 12x Silicon grommets M4 to M3
• 4x M3*25 YFS screw
• 4x M3*30 YFS screw
• 8x M3 Nylon nut