GEPRC TinyGO LED FPV Whoop RTF

Summary

GEPRC TinyGo LED version is a full-color RGB series.Specially designed and modified to celebrate the coming festival.Especial for pilots which love DIY build FPV.Compare with the TinyGo Racing Version,TinyGo LED version replaces EVO anti-collision sponge with LED straps.Total weight without batteries is under 55grams.It lasts for 4-5 minutes in LED mode and 5-6 minutes in normal mode.There are 52 high brightness small LED lamps in the whole Quadcopter.The LED style can be programmed through Betaflight.You can customize the colors and styles as you wish .When flying at night.you can enjoy the pleasure of colorful flight.It should be noted that the LED lamp won’t waterproof.Please avoid flying in wet environment.The TinyGo LED version can be bring Perfect Experience

GEPRC Happy to announce a new member of our family“TinyGO LED” Ready To Fly Kit which is suitable for any novice from scratch and Indoor flight.Through a great number of tests.Better technical indexes and Good

TinyGO LED is RTF Kit for Indoor Flight. The Kit contains a high-definition 800x480px FPV Goggle and the latest TinyRadio GR8 Remote Controller.It supports 8 channels and is specially designed for indoor and novices.The remote control has a good feeling of control and It is lightweight and easy to carry.The good point is that you don’t need to carry heavy equipment.With our customized GEPRC Fly Bag.it’s very convenient to go to the field,travel,and Indoor flight.

TinyGO LED can use its own charger to charge.The charger uses the Type-C interface.You can use the movable power bank to charge as well.Using conveniently and quickly.

TinyGO LED can be flight more than 4 minutes (Depending on flight habits).Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crash.There is an EVA protection foam around the frame.More elastic and hard to damaged and deformed.

TinyGO LED is carefully assembled and assembles by GEPRC team, with excellent performance.You can start a whole new journey and enter into FPV World.TinyGO will be the best choice for your first FPV Drone.

This looked like the beginning of a terrific flight Experience Literally

Changelog

January 12, 2022:TinyGo shipped from today are the new remote controller, the new charger version.

December 16, 2022: VTX changed from 5.8G 25~200mW VTX to RAD Whoop 5.8G 400mw VTX

December 16, 2022: The flight controller changed from GEP-12A-F4 to TAKER F411 8Bit 12A FC

Note: If you buy a drone only, If you have a new TinyRadio GR8 remote controller, it can be directly bound, and the old version of GEPRC GR8 remote controller should be bound by flashing the old version of the CLI

Feature

• TinyGO LED is very suitable for indoor flight.More than 4 minutes of flight time
• Using GEPRC-12A-F4 FC system.reliable and stable
• No Propellers in view. Anti-jamming VTX. NO Jello flight Footage.Stable flight picture quality
• The Newly Developed TinyRadio GR8 Remote Controller is specially designed for Novice and indoor flight
• High-Quality FPV Goggle.High definition 800 * 480px.sensitive 5.8G receiver
• Ready To Fly Kit.Including a GEPRC Fashion Fly bag.Portable and Light weight

Configuration

• Name: TinyGO
• Brand: GEPRC
• Frame: GEP-TG16
• Motor to Motor: 79mm
• FC: TAKER F411 8Bit 12A
• MCU: STM32F411
• IMU: 42688-P
• Blackbox: 16Mb
• OSD: BetaFlight OSD w/ AT7456E chip
• ESC: 8Bit 12A
• VTX: RAD Whoop 5.8G 400mw VTX
• Camera: Runcam Nano2/Caddx Loris 4K 60fps
• Propeller: GEMFAN 1636*4 (4 pairs)
• Motors: GR1102 10000Kv
• TinyGO LED Weight(Without Batteries) :55 Grams

Remote Controller

• TinyRadio GR8 Remote Controller
• Radio Frequency:2.4GHz
• Radio Protocol:FHSS
• Channel:8
• Transmit Power:< 20 dBm
• Antenna interface:SMA
• Low Voltage alarm: <6.6v
• Batteries: two 18650 batteries or a 2S battery.(not included)

Receiver

• Channel:8
• Voltage:5V
• Radio Frequency:2.4GHz
• Radio Protocol:FHSS
• Range: 100 meter

FPV Goggle

• Resolution:800*480px
• Size of Screen:4.3 inch
• Whole Size:155mmx144mmx113mm
• In-built batteries:3.7v/2000mAh
• Working Hours:2.5 Hours
• Weight:314.6 Grams

FPV Batteries

• Batteries Capacity:530mAh
• Voltage:4.35v 1S1P
• Discharge rate:90C
• Size:(61mmx16.7mmx7mm)
• Weight:12.7 Grams
• Interface:PH2.0

Charger

• Input power:5v（USB & Type C）
• Full charged Voltage:4.35v
• Output current:1000mAh
• Charging:It can charge 2 PCS 1s HV lipo 4.35v HP2.0/GNB27 plug batteries at the same time

Include

• 1x TinyGO LED Quadcopter
• 1x TinyRadio GR8 Transmitter
• 1x GEPRC FPV RG1 Goggle
• 1x GEPRC 1S LiHV 4.35v Charger
• 4x GEPRC LiHV 4.35v 90C Batteries
• 1x Battery strap
• 4x Gemfan 1636*4 Props(pairs)
• 1x GEPRC Fly bag
• 1x Screwdriver