GEPRC TAKER F722 BLS 80A 8S STACK

Feature

1. Uses the mainstream STM32F722 chip
2. Equipped with the latest 42688-P gyroscope
3. 16M onboard black box storage
4. Integrated LC filter
5. Upgraded Type-C USB interface
6. Directly plugs into the DJI Air Unit
7. Paired with the TAKER H80_8S_BLS 80A 4IN1 ESC, providing a smooth flying experience
8. Simple and efficient installation method with shock absorbers for stable gyroscope performance
9. Dual independent BECs: 12V@3A and 5V@3A
10. Supports 8S Lipo batteries
11. Support direct insertion of 8 motors

Specifications

TAKER F722 8S Flight Controller

• MCU: STM32F722
• IMU: ICM42688-P(SPI)
• Air Unit Connection: Direct plugs into DJI Air Unit
• Black Box: 16M onboard
• USB Interface: Type-C
• Barometer: Supported
• OSD: BetaFlight OSD w/ AT7456E chip
• BEC: 5V@3A,12V@3A dual BEC
• Firmware Target: GEPRC_TAKER_F722_8S
• Dimension: 38.5×38.5mm,
• Mounfing Hole Size: 30.5×30.5mm
• Input Voltage: 3-8S LiPo
• UART: 6 UARTs

TAKER H80_8S_BLS 80A 4IN1 ESC

• Input Voltage: 3-8S Lipo
• Ammeter: Support
• Continue Current: 80A
• Burst Current: 85A（5 second）
• Support Protocol: Dshot 150/300/600
• Size: 56.3*61.1mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
• Weight: 28.3g
• Target: B_X_30

Includes

1 x TAKER F722 8S Flight Controller

1 x TAKER H80_8S_BLS 80A 4IN1 ESC

1 x Filter board (Dual 50V 2200uF)

1 x DJI connection cable (SH1.0 6pin 100mm)

2 x FC adapter cable (SH1.0 8pin 30mm)

1 x Receiver silicone cable (SH1.0 4pin 150mm)

1 x Camera connection cable (SH1.0-SH1.25 3pin 135mm)

1 x VTX connection cable (SH1.0 4pin-6pin 100mm)

1 x XT90 battery plug

1 x Red and black power cable (10AWG 240mm)

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts (M3)

12 x Silicone anti-shake pads (M3)