GEPRC GEP-MX3 PNP(without receiver) or BNF(with recevier), Frsky R-XSR Receiver(ONLY BNF)

Description

Summary:
GEPRC Sparrow is a racing FPV Quadcoprter which apply to 3 inch props， GEPRC assembly and debugging. The Sparrow have two version choice (PNP/BNP). The Sparrow frame kits use GEPRC brand model GEP-MX3, The GEP-MX3 frame kits super light, Wind resistance low, super strong, Best apply to racing. The frame kits use full 3k carbon, Body use 7075 High strength aluminum alloy parts, This will make it stronger. The motors use GEPRC brand GR1408 3500kv which specifically for racing development, The propeller use GEPRC brand GEP-P3042-3 which best apply to GR1408 motor, Our team tested, The efficiency is best. The Flight controller and Esc use HGLRC brand XJB F328-TX20 which FC STM32 F303 MCU and ESCs support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Make sure power, ESCs Maximum 28A. FPV part use Runcam Brand model Micro Swift,VTX use HGLRC brand model XJB-TX20 Mini FPV Transmitter. We are offer two version PNP(without receiver) and BNF(with recevier)

Specifications:
1.Frame: GEPRC GEP-MX3
2.Motor: GEPRC GR1408 3500kv
3.Props: GEPRC GEP-P3042-3
4.Camera: Runcam Micro Swift 2.1mm(PAL/NTSC)
5.HGLRC XJB F328-TX20

Features:
1.full 3k carbon 3mm thickness
2.7075 aluminium alloy super strong body, so beautiful
3.YFS 12.9 class screw
4.HGLRC Highly integrated tower structure electronic equipment（Flight Controller: BF3-EVO Betaflight F3，
  ESCs: 28A 2-4S Blheli_S BB2 4 in 1 ESC）
5.Runcam Micro Swift 1/3 inch 2.1mm lens FOV 160° PAL / NTSC
6.GEPRC GR1408 SPEEDX motor, Big power
7.GEPRC GEP-P3042-3 3blade props, Best pull have 632g with GEPRC GEP-GR1048 motor
8.You can carry a gopro camera completely
9.Test best speed is 170km/h

This GEP-P3042-3 three Blade Propeller, with a length of 3 inch and a pitch 42 degrees, has a diameter of M5. It is a Propeller of both efficiency and power. Multiple colors can be selected, which is the best time for small frame. High strength PC material, strong and durable, GEP-P3042-3 was strengthened at the root, and the impact was not easily broken. High precision mold results in good dynamic balance, reducing the load on the motor. With gep-gr1408 motor, the force can reach 648g pull.

HGLRC XJB F328-TX20
  Flight Controller: BF3-EVO Betaflight F3
  Processor: STM32 F303 MCU
  Sensor: SPI Sensor MPU6000
  Firmware version: Betaflight 3.15
  ESCs: 28A 2-4S Blheli_S BB2 4 in 1 ESC
  Input Voltage: 2-4S Lipo battery
  Constant Current: 28A
  Peak Current: 35A
  BEC Ouput: NO
  Firmware: BLheli_S 16.5
  CPU: SILABS EFM8BB2 48MHZ
  MOS Tube: TOP QUALITY MOSFET
  Firmware: Betaflight 16.5
  Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and
  reverseVTX: 5.8G
  VTX: XJB-TX20 Mini FPV Transmitter
  Output power: 0/25mW/100mW/250mW switchable
  BAT: 7-24V,BEC 5V-3A
  170mA—-250mW
  120mA—-100mW
  80mA—-25mW
  Video system: NTSC/PAL
  Antenna: IPEX
  Frequency: 5.8GHz 9 bands 72 channels, with Raceband: 5325-5945 MHZ

Includes：
-1 x GEP-MX3 Frame kit
-1 x Runcam Micro Swift
-1 x HGLRC XJB F328-TX20
  PBF3-EVO Betaflight F3
  ESC 28A 2-4S Blheli_S BB2 4 in 1
  XJB-TX20 Mini FPV Transmitter
-4 x GEPRC-GR 1408 3500KV (2CW+2CCW)
-6 x GEPRC GEP-P3042-3 propellers
-1 x Battery Strap
-Frsky R-XSR Receiver(ONLY BNF)