GEPRC Crocodile7 HD Lite

The Crocodile7 HD,Long voyage and Powerful,That’s the type of feeling I’m looking forward to.The Crocodile7 HD passes testing and the operation shows control system and upgraded structure can be literally bring fantastic experience

There are two versions of Crocodile7 HD to choosing,Crocodile7 HD PLUS and Crocodile7 HD LITE.They have their own advantages.Crocodile7 HD Plus and Crocodile7 HD Lite are both using the DJI FPV system:DJI Air Unit HD and Caddx Vista HD.Crocodile7 HD PLUS with doubel antenna it can record 1080P video at 60fps on the SD card of the DJI Air-Unit. It weighs 475g and has high-efficiency.Crocodile7 HD LITE can’t record on the SD card,it can only record 720P video on the FPV Goggle side,but the advantage is that lightweight and flexible which is only 445g.

Crocodile7 HD continues all the advantages of the previous version and It’s FIRST CHOICE for long range flight.The Upgraded power system using the latest Span F722 HD FC,combined with the DJI HD system,Stable and delicate Flying Experience,Flight time around 7-10 minutes.

Crocodile7 HD with independently design of GPS part,added a GPS module,When signal losing or VTX out of control,It can be start the rescue mode of betaflight (in emergency,The FPV fly back to the approximate position of the base,If the signal is get again,Be sure to operate the FPV to landing manually.) ,The Rescue mode won’t landing automatically.

In terms of power,it is equipped with the powerful G2306.51350kv motor,7-inch propeller,6S 2600mAH batteries,The power and efficiency are extremely superb.

The Crocodile7 HD is perfectly assembled and tested by GEPRC engineers,The overall flight performance is superior.

Specifications：

• Brand:GEPRC
• Model:Crocodile7 HD Lite
• Frame:GEP-CEHD7
• Wheelbase:315mm
• The thickness of the top plate:2.5mm
• The thickness of the bottom plate:2.5mm
• The thickness of the arms plate:5mm

Flight Controller System：SPAN F722 HD

• MCU:STM32F722RET6
• Gyro: 6-Axis
• DJI FPV Air Unit and Caddx Nebula Nano HD Supported.
• BlackBox:16Mb onboard Flash
• Type-C USB interface
• OSD:BetaFlight OSD w/ AT7456E chip
• Baro:BMP280
• BEC Output: 5V,9V BEC
• Integrated LC Filter
• Firmware target:GEPRCF722
• Size:36x36mm board, φ4mm with Grommets φ3mm
• Power input:3-6S LiPo
• 5x UART

ESC：GEPRC G50A BLheli_32 50A

• VTX:DJI FPV Air Unit / CADDX Nebula Nano HD
• Props:DALPROP 7056
• Antenna:5.8G
• Motors:GR2306.5 1350KV
• GPS:BN-228
• Crocodile7 HD Plus Dry Weight:475g
• Crocodile7 HD Lite Dry Weight:445g
• Receiver:PNP(with DJI Receiver)/Frsky XM+/ Frsky RXSR/TBS Nano RX

Motors & Batteries Recommended:

• Motors:GR2306.5 1350KV
• Battery:6S 2600mAh

Include:

• 1x Crocodile7 HD DJI Quads
• 2x Strap
• 4x 7056 Props(pairs)
• 2x The silicone pad
• 3x L-shaped screwdriver
• 2x Antenna protection tube

The GoPro Mount of Crocodile HD7 Lite need purchase separately

Here is link:https://geprc.com/product/gep-crocodile-7-hd-gopro8-tpu-mount/

https://www.youtube.com/watch?v=CNyJuwrlGEM