SPAN F722 HD Stack

Summary: 

• MCU: STM32F722RET6
• IMU: MPU6000(SPI)
• BlackBox: 16Mb onboard Flash
• Integrated LC Filter
• Type-C USB interface
• The directly connected DJI Digital FPV System
• BLheli_32 50A ESC 4in1
• Simple installation method, compact space
• Support:Sbus,PPM,CRSF,DSMX,iBus

Specifications:

• MCU: STM32F722RET6
• IMU: MPU6000(SPI)
• DJI FPV Air Unit Supported.
• BlackBox: 16Mb onboard Flash
• Type-C USB interface
• OSD: BetaFlight OSD w/ AT7456E chip
• Baro：BMP280
• BEC Output: 5V,9V BEC
• Integrated LC Filter
• Firmware target: GEPRCF722
• Size: 36x36mm board, φ4mm with Grommets φ3mm
• Power input: 3-6S LiPo
• 5x UART

BL32 50A ESC 4IN1:

• MCU: STM32FO51K86(32bit 48mHz)
• Continuous Current: 50A
• Peak Current: 55A (5S)
• Current sensor: YES
• Telemetry：Supported
• Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
• Firmware Version:GEPRC-BL32-4IN1
• Input Voltage: 3-6S Lipo

BLHeliSuite download:

http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file

Receiver Support:

1. Frsky XM/XM+/R-XSR
2. Futaba Receiver
3. DSM/DSMX
4. FlySky Receive
5. TBS Crossfire Receiver
6. AC900
7. Most receivers that support SBUS

Include：

• 1x GEP-F722-HD Flight Controller
• 1x GEPRC G50A ESC
• 1x 35V 470uf  Capacitor
• 4x Silicon grommets M4 to M3
• 4x M3*22mm Screw
• 4x M3*30mm Screw
• 1x XT60 Power Cable
• 1x ESC Cable
• 1x DJI Cable