Add to Wishlist

CineGO HD FPV

Price range: $389.99 through $1,229.00

SKU: N/A Categories: , , Tags: , ,

 

 

Summary:

CineGO HD is the latest CineWhoop model of our team. It is equipped with the latest Caddx Vista high-definition image transmission. So far, it is the lightest Cine model. CineGO HD is mainly used for CineWhoop flight. Its ultra-light design is 30% lighter than traditional GoPro 7/8 aircraft. The whole machine is only 247g, and the flight experience is very flexible.

Features:

  • No Propellers  in view.
  • With Caddx Vista Digital HD video transmission system, Goggle can record 720P video
  • Equipped with a 3-inch tpu guard frame, Ensure safety and reliability
  • Full 3K Carbon Fiber
  • Flight Control System:STABLE F405 SYSTEM
  • Two types of power. 6S version uses GR1507 2800KV motor. 4S version uses GR1507 3600Kv motor
  • Full Soft Mounted FC System: Provides a clean operating environment for gyro.
  • Exquisite Assembly Process: Eliminate any potential installation problems.
  • Weight:247g(without battery and GoPro Mounts TPU)

Specifications:

Frame:

  • Full 3K Carbon Fiber
  • Top plate : 2mm
  • Bottom plate : 3mm
  • Side plate : 1.5mm
  • Wheelbase : 155mm
  • Motors: GR1507 2800Kv/3600Kv
  • Propeller:GemFan 3018 (Three Blades)
  • Recommended Battery：6S 1050mAh (No inclued)//4S 650mAh-850mAh
  • Recommended Camera：GoPro Hero 7/8(No inclued)
  • Flight / Take off weight is less than 500g

Caddx Vista SPECS:

  • Size: 30.45 x 29 x 13mm
  • Weight: 19g
  • Antenna Connector: U.FL
  • 20×20 stack
  • 200mw to 1200mw max output power
  • Range 4km max
  • 2S to 6S
  • High quality mode 30-40 ms
  • Low latency mode 21-28ms
  • Compatible with DJI HD camera
  • Compatible with DJI HD goggles

Electronic System(STABLE PRO F4 35A):

STABLE V2 F4 Flight Controller Specs：

  • Model:STABLE F4 35A
  • MCU: F405
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Baro:NO
  • BEC Output: 5V@3A
  • Integrated LC Filter
  • Firmware target: OmnibusF4SD
  • Size: 26x26mm board, 20mm mounting holes (M2)

STABLE V2 F4 ESC BL32 2-6S 4in1 Specs：

  • MCU:STM32F051
  • Input:2-6s lipo
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm,M2
  • Supports Dshot1200,Proshot,Oneshot,Multishot
  • Current meter: Yes
  • Target: GEPRC-BL32-4IN1

Include：

  • 1x CineGO HD CineWhoop Quadcopter
  • 4x 3inch Props(pairs)

 

Weight150 g
Dimensions300 × 200 × 100 mm
Receiver Option

DJI Receiver, Frsky XM+, Frsky R-XSR, TBS Crossfire Nano RX, RTF(Mode 1 – Right hand throttle), RTF(Mode 2 – Left hand throttle)

Input Battery

4S, 6S

Camera

Vista, Nebula Nano

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.