The frame is gep-tsx5, Named Viper.
GEP-TSX5 is made of 3K Carbon Fiber Quadcopter Frame plates and the Grand 12.9 YFS screw. The Stretch-X made it more adapted to the Racing. Our design teams decide to use 5mm(thickness) x 9mm(width) Arm to overcome wind resistance effectively. The motor seat is redesigned to a large extent to protect the motor. The camera seat works for most brands, Such as Runcam swift /swift2, Foxeer HS1190 and so on. The camera 20 to 60 degress. But I’d like to introduce the GoPro. 35-58 degress. Applies to most scenarios. Such as Racing and Freestyle.
PRODUCT BASIC INFORMATION
Props Size: 5inch
Flight Controller：F3 / F4 / Naze32 / CC3D
Battery: 3S 1300mAh ~ 4S 1500mAh
- All plate use 3k full Carbon, make sure strength
- Layout Stretch-X. High speed. Good apply to Racing or Freestyle
- The Arms is 9mm width and 5mm thickness, Overcome wind resistance effectively
- Redesign motor seat, Make sure motor no easy broken.
- Good side board design, good protection of the camera
- GoPro seat, 35 to 58 degress.
- Motor to motor is 220mm, Make sure the air unobstructed.
- YFS brand screw, 12.9 class hardness
- Battery antiskid stick, Make sure the battery no lost.
- The battery protection board can avoid the battery broken
The design of the bit by bit
Support swift/swift2 HS1190 so on
9mm WIDTH 5MM THICKNESS
Overcome wind resistance effectively
Make sure motor no easy broken
GoPro seat, 35 to 58 degress.
High intensity and low cost for pilot
PERFECT WITH SESSION
Make sure record is good
3mm THICKNESS TOP PLATE
Fragile plate but stronger
THE BATTERY PROTECTION BOARD
Battery not easy broken
12.9 Class hardness
GEP-MX5 ALL PARTS