Open post

GEP210 Professional crossing FPV aircraft release

GEP210

And beyond born professional racing across the machine GEP210, after months of struggle, finally, and we met. The aircraft has the following main characteristics:

  1. 3K hardness of carbon plate
  2. motherboard for the 3K one plate, the thickness of 3MM, strong and durable
  3. includes a plate (BEC 5V and 12V out), a tail plate (combination taillights, a CCD aluminum plate) lens plate (strong)
  4. lens angle can be adjusted, the maximum angle of 45 degrees
  5. the overall layout is reasonable, the installation is simple and convenient.
  6. overall low center of gravity, battery and motor in the same plane, the center of gravity balance, tumbling more smooth and smooth
  7. frame structure is strong, in addition to the 3MM board, the carbon fiber board is 1.5MM, high strength
  8. machine tail with two kinds of image transmission method, the installation of the antenna vertical installation and bending wire, you adjust
  9. 10 special reinforced M3*15MM aluminum column, so that the frame structure is strong
  10. side plate and tail plate more concise
  11. high precision and high durability screw

 

Technical parameters:

Diagonal - wheelbase 210MM

The basic body weight 98 grams

We recommend the use of motor 1806/2204/2206/2208

Support 4 inch /5 inch propeller

 

Recommended configuration:

Flight control: Naze32 or F3 flight control

Image transmission: 200mV 5.8G

Electric adjustment: 20A BL firmware

Motor: 2204 2300kv motor

Lens: Sony 700 line camera lens